Sonata GL V6-2.5L (1999)
CAUTION: Cover or plug the hose and nipple part of the radiator so that dust, foreign materials, etc. do not enter after the hose has been
disconnected from the radiator.
6. Remove the radiator mounting bolt.
7. Remove the radiator together with the fan motor.
8. Remove the radiator fan motor, condenser fan motor from the radiator.
INSPECTION
1. Check for foreign material between radiator fins.
2. Check the radiator fins for damage and straighten if necessary.
3. Check the radiator for corrosion, damage, rust or scale.
4. Check the radiator hoses for cracks, damage or deterioration.
5. Check the reserve tank for damage.
6. Check the automatic transaxle oil cooler hoses for cracking, damage or deterioration.
INSTALLATION
1. Fill the radiator and reservoir tank with clean coolant mixture.
2. Run the engine until the coolant has warmed up enough so that the thermostat valve opens, and then stop the engine.
3. Remove the radiator cap and pour in the coolant until it is up to the filler neck of the radiator. Fill the reservoir tank to the upper level.
4. Check to be sure that there is no leakage from the radiator, hoses or connections.
