Sonata GL V6-2.5L (1999)
4. Remove the intake manifold and gasket.
INSPECTION
Intake Manifold
1. Check the intake manifold for damage, cracking, or restriction of the vacuum outlet port, water and or gas passages.
2. Check for distortion of the cylinder head mounting surface and surge tank mounting surface by using a straight edge and feeler gauge.
Standard value: 0.15 mm (0.006 inch) or less
Service limit value: 0.2 mm (0.0078 inch)
INSTALLATION
1. Install the intake manifold and delivery pipe in the reverse order of removal.
CAUTION: Do not use the used intake manifold gasket.
