hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Deploying Airbags (Inside Vehicle)|Page 11322 > < Deploying Airbags (Inside Vehicle)
Page 2
background image

5. Connect deployment tool to the connector of each module.
6. At location as far away from the vehicle as possible, press the push button (removed from the vehicle) to deploy the airbag.

CAUTION:
-

Before deploying the airbag in this manner, first check to be sure that there is no one in or near the vehicle. Wear safety glasses.

-

The inflator will be quite hot immediately following the deployment, so wait at least 30 minutes to allow it to cool before attempting to handle
it. Although not poisonous, do not inhale gas from airbag deployment.

-

If the airbag fails to deploy when the procedures above are followed, do not go near the module. Contact your local distributor.

Deploying Airbags (Inside Vehicle)|Page 11322 > < Deploying Airbags (Inside Vehicle)