hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 1052 > < Diagram Information and Instructions|Page 1050
Page 2
background image

1. Prepare a voltmeter and connect it to FTP pins as shown.

2. After 20 min. idling, inspect the voltage.

System voltage: 5 V
At accelerate: Max. 4.5, Min. 0.5 V

3. At idle, inspect that voltage fluctuates up to accelerate rpm up and down.

NOTE:  If voltage is not within spec.as procedures, there is leakage and inspect the fuel tank and hoses toward canister and fuel neck. Then repair or
replace relevant parts.

Diagram Information and Instructions|Page 1052 > < Diagram Information and Instructions|Page 1050