Testing and Inspection of Ignition Switch for Sonata GL V6-25L
Ignition Switch: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect the negative battery terminal.
2. Remove the air bag module.
CAUTION: The SRS system is designed to retain enough power to deploy air bag for about 30 seconds even after battery has been disconnected,
so serious injury may result from unintended air bag deployment if service is done on the SRS system immediately after battery cable is
disconnected.
3. Loosen the tapping screw and lift up horn pad and remove it.
4. Remove the lock nut and the washer.
5. Pulling the dynamic damper forward, lift it up and remove it.
6. Install the special tool (09561-11001) and remove the steering wheel.
CAUTION: Do not hammer on the steering wheel to remove it.
7. Remove the steering column lower and upper shrouds.
8. Remove the lower cover.
