Sonata GL V6-2.5L (1999)
10. Insert the rack into the gear housing. Install the rack bushing and rack stopper.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing and then install the circlip
while turning the rack stopper.
CAUTION: The circlip end should not be visible through the notched hole of the rack housing.
12. Apply the specified fluid and grease to the pinion valve assembly and install to the gear housing assembly.
Recommended fluid: Power steering fluid (PSF-3)
Recommended grease: Multipurpose grease SAE J310a, NLGI Grade #2 EP
13. Install the ball bearing using special tool (09222-21100).
14. Install the pinion and valve assembly to the valve housing.
15. Install the oil seal using the special tool (09432-21601).
