Sonata GL V6-2.5L (1999)
2. Install the clutch disc assembly to the flywheel using special tool (09411-11000).
3. Install the clutch cover assembly to the flywheel and temporarily tighten the bolts one or two steps at a time in a star pattern.
Tightening torque:
Clutch cover bolt: 15-22 Nm (150-220 kg.cm, 11-16 ft. lbs.)
4. Align the bearing to the release fork and then install it to the sleeve of housing.
CAUTION: Apply multipurpose grease (CASMOLY L9508) to the grease home of bearing sleeve and contact point of release fork.
5. Install the release lever to the release fork.
CAUTION: If transaxle assembly is installed to engine without doing this step, release bearing can be separated according as the release fork
rotates free.
6. Install the transaxle assembly to the engine.