Sonata GL V6-3.0L (1997)
4. Remove the piston assembly with special tool to twist the piston out of the caliper body.
5. Remove piston seal with finger tip.
CAUTION: Do not use sharpened tools to prevent damage to inner cylinder.
INSTALLATION
1. Check for worn, damaged, or rusted piston bore and piston.
Replace the damaged parts if necessary.
2. Check for damaged piston seal, boot, and pin insulators.
3. Apply a recommended lubricant to the following parts:
PARTS
RECOMMENDED LUBRICANT QUANTITY
Piston seal
Brake fluid (Dot 3)
As required
Cylinder inner side
Brake fluid (Dot 3)
As required
Piston boot
Brake fluid (Dot 3)
As required
Piston outer surface
Brake fluid (Dot 3)
As required
Guide-rod insulators
Rubber grease
As required
