Sonata GL V6-3.0L (1997)
6. Remove the radiator mounting bolt.
7. Remove the radiator and the fan motor.
8. Remove the radiator fan motor and condenser fan motor from the radiator.
INSTALLATION
1. Installation is the reverse of removal.
2. Fill the radiator and reservoir tank with clean coolant mixture.
3. Run the engine until the coolant has warmed up enough so that the thermostat valve opens and then stop the engine.
3. Remove the radiator cap and pour in the coolant until it is up to the filler neck of the radiator. Fill the reservoir tank to the upper level.
4. Check to be sure that there is no leakage from the radiator, hoses or connections.
