Sonata GL V6-3.0L (1997)
Distributor: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the two distributor cap retaining bolts and move the cap to one side.
3. Remove the distributor mounting nut and the distributor assembly.
INSTALLATION
1. Turn the crankshaft so that the No.1 cylinder is at top dead center.
2. Align the distributor housing and gear mating marks.
3. Install the distributor in the engine while aligning the groove of the distributor's installation flange with the center of the distributor installation
stud.
