Sonata GL V6-3.0L (1997)
Daytime Running Lamp: Diagram Information and Instructions
Connector Configurations
This section shows the cavity or terminal locations in all the multi-pin connectors shown in the electrical diagrams. It is helpful for you to locate check
points, together with the wire colors and terminal numbers in the electrical diagrams. The configuration drawings shows the connector views as seen
from a component after the harness connector has been disconnected. When more than one connector is connected to a component, the connectors are all
shown together. Both halves of in line connectors are shown together.
Connector Identification
A connector identification symbol consists of a wiring harness location classification symbol corresponding to each other wiring harness location and
number peculiar to the connector. These connector locations can be found in the WIRING HARNESS LAYOUT.
NOTE: Connectors which connect each wiring harness are represented by symbols.
Connector View and Numbering Order
