Sonata GL V6-3.0L (1997)
4.
Adjust the kickdown servo to the specification shown in the appropriate Shop Manual, under "Automatic Transaxle" section. Refer to TSB #
96-40-016 for 1990-94 Excels and Sonatas, 1992-95 Elantras or 1991-92 for Scoupes.
5.
Note:
Proceed with step 5 for vehicles listed in the table. For all other vehicles, replace the transaxle.
If Steps 1-4 indicate that all components are within specification and no DTCs are found, proceed as follows:
-
For the vehicles produced PRIOR to the effective date shown, replace the TCM with the part number shown.
-
For vehicles produced AFTER the effective date, replace the transaxle.
PARTS INFORMATION:
WARRANTY INFORMATION:
Normal warranty operation codes and times apply.
Technical Service Bulletin # 98-40-003
Date: 980601
A/T - Harsh 3-2 Downshift
Group: TRANSAXLE
Number: 98-40-003
Date: JUNE, 1998
Model: 1997-98 SONATA 3.0L
Subject
1997-98 SONATA 3.0L HARSH 3-2 DOWNSHIFT
DESCRIPTION:
Some 1997-98 Sonata 3.0L vehicles may exhibit a harsh 3-2 downshift. The condition occurs when driving at a steady speed of 40-45 mph in 4th gear,
then accelerating at wide open throttle (WOT). During the downshift from 4-3-2, a harsh downshift is felt. If a vehicle experiences this condition, please
follow the diagnostic procedure shown.
DIAGNOSTIC PROCEDURE:
1.
Inspect the automatic transaxle fluid (ATF) level in "NEUTRAL" with the ATF at normal operating temperature (70-90°C, 158-194° F)
A.
If the oil level is low, add ATF to bring the level to the top of the "Full" mark.
B.
Inspect the ATF color and smell. If the ATF is black and smells burned, remove the transaxle oil pan. If metal particles and clutch material
