Sonata GL V6-3.0L (1997)
Ignition Cable: Description and Operation
RELAY BOX (ENGINE COMPARTMENT)
FUSIBLE LINK
SPECIFICATIONS
INSPECTION
1. Check for a burnt fusible link with an ohmmeter.
2. If a fusible link burns out. there is a short or some other problem in the circuit. Carefully determine the cause and correct it before replacing the
fusible link.
NOTE: The fusible link will burn out within 15 seconds if a higher than specified current flows through the circuit.
FUSES
INSPECTION
1. Be sure there is no play in the fuse holders, and that the holders hold the fuses securely.
2. Are fuse capacities for each circuit correct?
3. Are there any blown fuse? If a fuse is to be replaced, be sure to use a new fuse of the specified capacity. Always determine why the fuse blew first
and completely eliminate the problem before installing a new fuse.
CAUTION: Never use a fuse of higher capacity than specified.
