Sonata GL V6-3.0L (1997)
Power Steering Fluid: Testing and Inspection
1. Position the vehicle on a level surface.
2. Start the engine. With the vehicle stationary, turn the steering wheel several times continuously to raise the fluid temperature to 50-60°C (122-140
°F).
3. With the engine at idle, turn the steering wheel fully clockwise and counterclockwise several times.
4
Make sure that there is no foaming or cloudiness in the reservoir fluid.
5. Stop the engine and check for any difference in fluid level between a stopped and a running engine.
NOTE:
-
If the fluid level varies 5 mm (0.2 inch) or more, bleed the system again.
-
If the fluid level suddenly rises after stopping the engine, it shows that bleeding is not satisfactory.
-
Incomplete bleeding will produce a chattering sound in the pump and a noise in the flow control valve, decreasing durability of the pump, etc.