Sonata GL V6-3.0L (1997)
CAUTION: Do not plug the vent hole in the rack with grease.
10. Insert the rack into the gear housing. Install the rack bushing and rack stopper.
11. Push in the rack stopper until the circlip groove of the rack stopper is aligned with the notched hole of the rack housing and then install the circlip
while turning the rack stopper.
CAUTION: Do not plug the vent hole in the rack with grease.
12. Apply the specified fluid, automatic transmission fluid DEXRON II type and grease, multipurpose grease SAE J310a, NLGI Grade #2 EP to the
pinion valve assembly and install to the gear housing assembly.
13. Install the ball bearing using special tool (09222-21100).
14. Install the pinion and valve assembly to the valve housing.