Sonata GL V6-3.0L (1997)
7. Before removing the crossmember mounting nuts, support the crossmember with a transaxle jack.
8. Remove the crossmember mounting nuts.
9. Remove the rear suspension assembly.
INSPECTION
Check it for cracks or other damage.
INSTALLATION
1. Install the rear crossmember in the reverse order of the removal procedure.
BUSHING REPLACEMENT
1. Use the Special Tool to remove and press fit the bushing.
2. When press fitting, after applying some soapy water, press in the direction of the arrow into the position as shown in the illustration.
3. Press until the inner pipe projection (A), is at the standard value of 8.5-9.5 mm (0.33-0.37 inch).
