Sonata GL V6-3.0L (1997)
1. Check to see if the sliding surface of the disc, plate are worn or burnt, if necessary, replace them.
NOTE: If the lining of the disc is peeling off, replace all discs.
2. Check that the check ball is free by shaking the piston.
ASSEMBLY
1. Install D-section ring in groove in outside surface of piston with its round side out Install another D-section ring to front clutch retainer.
2. Apply automatic transaxle fluid to outside surface of D-section rings, then push piston into front clutch retainer by hand.
3. Install return spring and spring retainer.
4. Compress return spring with special tool (09453 - 21000, 09453 - 24000) or equivalents, and install snap ring.
5. Install four clutch reaction plates and three clutch discs. Prior to installation, apply automatic transaxle fluid to them.
CAUTION: