Sonata GL V6-3.0L (1997)
NOTE: Connector color.
INSTALLATION
1. Apply a coating of the specified grease to the interior of the adjust bushing.
Specified grease: Chassis grease.
2. Move the shift lever and the transaxle range switch to the "N" position, and install the transaxle control cable.
3. When connecting the control cable to the transaxle mounting bracket, install the clip until it contacts the control cable, in the position shown in the
illustration.
4. When connecting the control cable to the shift lever mounting bracket, install the clip until it contacts the control cable.
5. Install the cable mounting bolts.
6. Install the Overdrive (O/D) switch to the selector knob.
7. Install the indicator.
8. Install the selector knob.
9. Insert the Automatic Transmission (A/T) shift lever connector pins correctly.
10. Connect the A/T shift lever connector and key lock switch connector.
