Sonata GL V6-3.0L (1997)
10. Connect the A/T shift lever connector and key lock switch connector.
11. Apply the specified grease at the places shown in the figure.
Specified grease: Multipurpose grease.
12. Place the shift lever in the "N" position, and then turn the cam rod adjusting so that the clearance between the sleeve and the lever assembly end is
within the standard value.
Standard value (A): 15.2-15.9 mm (0.598-0.625 inch)
13. Install the selector knob.
14. Install the console box. Refer to Body and Frame.
