Sonata GL V6-3.0L (1997)
-
Core Return Checklist
-
Pre-addressed shipping label
to remanufacturing center
-
Bill of Lading
-
Installation tips
9.
Parts Department completes all required fields of information on the Core Return Checklist. Failure to do so will result in debit.
10.
Technician completely drains all fluids, removes the ATM and torque converter from the vehicle.
Note:
Do not disassemble any part of the ATM.
11.
Flush the transaxle oil cooler and hoses using Hyundai Transmission Cooler Flush (part no. 00235-18100). Follow instructions in TSB #
98-40-004.
12.
Install the remanufactured ATM according to the appropriate Shop Manual. Fill the ATM fluid to the specified level using Genuine Hyundai
ATF+ Type 7176 or SP-II.
13.
Secure the removed torque converter to the removed ATM core using the torque converter retaining strap and bolts removed from the
remanufactured ATM unit.
14.
Install all plugs removed from the remanufactured ATM unit onto the removed ATM unit before packaging to prevent residual fluid from leaking.
15.
Place the top copy of the ATM Diagnosis Worksheet and the top copy of the Core Return Checklist into the plastic bag provided with the
remanufactured ATM unit and close the envelope securely. Enclose all needed forms and ensure they are completed and fully filled out.
Note:
Failure to properly complete and/or return the designated ATM Core Return Checklist and ATM Diagnosis Worksheet will result in a $50.00
reduction of the core credit and/or charge back of your warranty claim.
16.
Place the removed ATM into the shipping container provided with the remanufactured ATM (make sure that the ATM is placed in the proper
direction); secure lid with retaining straps.
17.
Using the address label provided with the remanufactured ATM unit, ship the removed ATM with the Core Return Checklist.
Note:
Freight charges are paid by HMA for returning the removed ATM to the remanufacturing center, if the enclosed bill of lading is used and ATM is
shipped via HMA approved carriers. DO NOT SUBMIT A WARRANTY CLAIM FOR THESE CHARGES.
18.
The bottom copy of the Core Return Checklist is retained in the dealership's Parts Department, filed by the repair order number indicated in the top
right hand corner of the checklist.
19.
The canary copy of the ATM Diagnosis Worksheet must be attached/retained with the shop copy of the RO in the Dealership's VIN service files.
Dealership must record the removed and remanufactured ATM serial numbers on the shop copy of the RO.
20.
Remanufacturing center receives the removed ATM, Core Return Checklist and ATM Diagnosis Worksheet.
21.
Remanufacturing center checks documents and sends forms to HMA.
22.
Dealer is reimbursed for core ATM.
Note 1:
Second and subsequent ATM reman replacements on the same VIN will require Regional/Technical Assistance Line approval/authorization prior to
performance of the repair and DPSM approval/authorization for claim payment
Note 2:
HMA may deny/chargeback all or portions of ATM claims and/or core credits on remanufactured units if:
-
Cooler not properly flushed, causing remanufactured ATM to fail
-
Remanufactured ATM damaged due to:
- Improper handling
- Improper installation/removal