Sonata GL V6-3.0L (1997)
Wheel Bearing: Service and Repair
Overhaul
DISASSEMBLY
1. Remove the snap ring.
2. Attach the special tools to the knuckle and hub.
3. Secure the knuckle in a vise.
4. Tighten the nut of the special tool and remove the hub from the knuckle.
NOTE: When removing wheel hub or wheel bearing from knuckle, replace wheel bearing assembly (outer race, inner races and grease seals) with
a new one.
5. Using the special tool, remove the wheel bearing inner race (outside) from the front hub.
6. Install the inner race (outside) that was removed from the hub to the wheel bearing, and then use the special tool to remove the wheel bearing.
INSPECTION
1. Check the hub and brake disc mounting surfaces for scoring and contamination.
2. Check the knuckle inner surface for scoring and cracks.
3. Check for a defective bearing.
ASSEMBLY
1. Fill the wheel bearing with multipurpose grease.