hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

IAT Sensor - Service Manual Correction|Page 3154 > < IAT Sensor - Service Manual Correction|Page 3152
Page 2
background image

Troubleshooting Procedures

TROUBLESHOOTING HINTS

The MIL is ON or the DTC is displayed on the HI-SCAN under the following condition;

1. When the intake air temperature is detected as below -40°C or higher than 120°C.
2. Input from intake air temperature sensor is below 0.1 V or above 4.8 V when engine is in a full warm-up condition.

Using HI-SCAN

IAT Sensor - Service Manual Correction|Page 3154 > < IAT Sensor - Service Manual Correction|Page 3152