hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Engine - Titanium O2 Sensors|Page 4094 > < Engine - Titanium O2 Sensors
Page 2
background image

One or more of the following Diagnostic Trouble Codes (DTC) stored in the ECM:
 B1/S1: Bank 1 (RH, Dash panel side)/Sensor 1 (Before Catalyst)

^

P0133: Front O2 circuit slow response bank 1.

^

P0134: Front O2 circuit inactive bank 1.

^

P1134: Transition time problem O2 sensor bank 1 sensor 1.

 B2/S1: Bank 2 (LH, Radiator side)/Sensor 1 (Before Catalyst)

^

P0153: Front O2 circuit slow response bank 2.

^

P0154: Front O2 circuit inactive bank 2.

^

P1154: Transition time problem O2 sensor bank 2 sensor 1.

REPAIR PROCEDURE:

1. Determine which repair is needed by using the "Warranty Vehicle Information" screen via DCS.

2. Replace the appropriate O2 sensor per the "Warranty Vehicle Information" screen.

NOTE: Some vehicles will NOT require the replacement of any O2 sensors.

3. Reprogram the ECM.

4. Make the appropriate warranty claim using the appropriate Op Code.

VEHICLES AFFECTED:

ECM SPECIFICATION TABLES:
SANTA FE:

Engine - Titanium O2 Sensors|Page 4094 > < Engine - Titanium O2 Sensors