hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Evaporative Emissions System > < MCC Catalysts Converter|Page 4406
Page 1
background image

Catalytic Converter: Testing and Inspection

CAUTION:  If large amounts of unburned gasoline flow into the converter, it may overheat and create a fire hazard. To prevent this, observe the
following precautions and explain them to your customer.

1. Use only unleaded gasoline.
2. Avoid prolonged idling.

Avoid running the engine at fast idle speed for more than 10 minutes and at idle speed for more than 20 minutes.

3. Avoid spark jump tests.

Do spark jump only when absolutely necessary. Perform this test as rapidly as possible and, while testing, never race the engine.

4. Avoid prolonged engine compression measurement. Engine compression tests must be made as rapidly as possible.
5. Do not run the engine when the fuel tank is nearly empty. This may cause the engine to misfire and create an extra load on the converter.
6. Avoid coasting with the ignition turned off and prolonged braking.
7. Do not dispose of the used catalysis with parts contaminated with gasoline or oil.

Evaporative Emissions System > < MCC Catalysts Converter|Page 4406