Sonata GLS V6-2.5L (2000)
6.
If you are doing this procedure from HDS, select "Run this program from its current location" and click "OK"
7.
A warning message may appear. Just click "Yes" to continue.
8.
After about 10 minutes of downloading, this window pops up. Just click "Start" and the new Hi-Scan Software will be automatically placed in the
proper directory.
9.
To update the reprogramming card in the Hi-Scan refer to TSB 00-00-001 for instructions.
NOTE:
When the reprogramming card is being updated in the Hi-Scan, remove the "SOL" and "INFO" cards and only leave the "Reprogramming card
installed.
Automatic Update Procedure
