hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Throttle Body > < A/T - Driveability Concerns|Page 4811
Page 2
background image

NOTE:
1. Do not disconnect the TP Sensor connector.
2. Use a digital type voltmeter to obtain an accurate value.

10. Turn the ignition switch "ON".

NOTE  Do not start the engine.

11. Check the throttle position sensor output voltage.

Throttle position sensor output voltage 250 - 800 mV

12. If the voltage is out of specification, check the throttle position sensor and associated harnesses.
13. Remove the feeler gauge.
14. Turn the ignition switch OFF.

Throttle Body > < A/T - Driveability Concerns|Page 4811