hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Sensors and Switches - Fuel Delivery and Air Induction > < Diagram Information and Instructions|Page 2858
Page 1
background image

Vehicle Speed Sensor: Description and Operation

The vehicle speed sensor which is installed on the speedometer diver gear in the transaxle provides a pulse signal to the ECM. and the ECM calculates
the vehicle speed. In addition to the vehicle speed sensor, a wheel speed sensor which is installed on the right front wheel provides a direct analog pulse
signal to the ECM. and the ECM calculates the vehicle speed (V6 without ABS ONLY).

With the ignition switch in ON or START, battery voltage is supplied from fuse 5 through the PINK (P) wire to the vehicle speed sensor (VSS). The
sensor is grounded by the BLK/WHT wire to G16 (V6)/G11 (DOHC).

The speedometer, other control modules. and data link connector in the circuit supply about 5 volts to the wire connected to C72 (V6)/C21 (DOHC)
terminal 3. 

The vehicle speed sensor (VSS) intermittently grounds the circuit, which generates a pulsed signal in it. The number of pulses per minute
increases/decreases with the speed of the car.

Sensors and Switches - Fuel Delivery and Air Induction > < Diagram Information and Instructions|Page 2858