hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Ignition Switch|Locations|Page 7891 > < Ignition Switch|Locations|Page 7889
Page 1
background image

Ignition Switch: Service and Repair

1. Disconnect the negative battery terminal.

2. Remove the air bag module.

CAUTION:  The SRS system is designed to retain enough power to deploy air bag for about 30 seconds even after battery has been disconnected,
so serious injury may result from unintended air bag deployment if service is done on the SRS system immediately after battery cable is
disconnected.

3. Loosen the tapping screw and lift up horn pad and remove it.
4. Remove the lock nut and the washer.
5. Pulling the dynamic damper forward, lift it up and remove it.

6. Install the special tool (09561-11001) and remove the steering wheel.

CAUTION:  Do not hammer on the steering wheel to remove it.

7. Remove the steering column lower and upper shrouds.
8. Remove the lower cover.

Ignition Switch|Locations|Page 7891 > < Ignition Switch|Locations|Page 7889