hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

CV Joints - Shudder On Acceleration|Page 6805 > < Axle Shaft|Diagrams|Page 6796
Page 1
background image

Constant Velocity Joint: Customer Interest
CV Joints - Shudder On Acceleration

Group: TRANSAXLE

Number: 01-40-018

Date: JUNE, 2001

Model: 1999-2000 SONATA

Subject
1999-2000 SONATA SHUDDER OR VIBRATION
DURING ACCELERATION

DESCRIPTION:

Some 1999-2000 Sonata vehicles produced prior to 4/12/00 may shudder or vibrate slightly during medium to full throttle acceleration.

To correct this condition, replace both CV joints on the left and right side driveshafts.

REPAIR INFORMATION:

1.

Remove the drive shaft according to the 1999 or 2000 Sonata Shop Manual, Page DS-8. Assemble the new driveshaft as shown in Steps 2-6.

2.

Install the small band and boot on the joint and shaft kit.

3.

Install the spider and the C-clip.

4.

Add CV grease (supplied with the joint and shaft kit) to the case and boot.

5.

Install the case to the spider.

6.

Install the boot to the case and attach both bands on the boot, using CV joint pliers.

CV Joints - Shudder On Acceleration|Page 6805 > < Axle Shaft|Diagrams|Page 6796