Sonata GLS V6-2.7L (2002)
9. Remove the door regulator channel mounting bolts and then remove the door regulator assembly.
Tightening torque
Door regulator channel mounting bolts:
4 - 6 Nm (40 - 60 kg.cm, 2.9 - 4.4 lb.ft)
10. Loosen the door lock actuator mounting bolts and remove the latch assembly.
11. Remove the outside door handle mounting bolts.
12. Remove the waistline molding.
13. Installation is the reverse of removal. When installing the door trim seal, butyl tape should not be placed over door trim fastener mounting area.
