Sonata GLS V6-2.7L (2002)
Brake disc thickness
Standard value: 24.5 mm (0.965 inch)
Limit : 22.4 mm (0.88 inch)
Thickness variation (at least 8 positions)
The difference between any thickness measurements should not be more than 0.005 mm (0.0006 inch).
2. If the disc is beyond the limits for thickness, remove it and install a new one. If thickness variation exceeds the specification, replace the brake disc
or turn rotor with an on the car type brake lathe ("MAD. DL-8700PP or equivalent).
Be sure to follow the exact brake lathe manufacturer instructions.
REASSEMBLY
1. Clean the components with isopropyl alcohol except for the pad and shim.
2. Install the piston seal.
3. After applying the specified brake fluid to the piston outer surface, install the piston into the cylinder.
4. Install the piston boot and boot ring.
5. Install the guide pin boots and guide pin.
INSTALLATION
1. Install the pads and brake cylinder.
