Sonata GLS V6-2.7L (2002)
1. Check the parking brake cables for an identification mark paint or wind tape and install as appropriate on the left and right sides.
Identification color
2. Set the adjuster lever all the way back when installing the shoe-to-shoe spring.
3. Install the grommet in the direction shown in the illustration.
4. Apply a coating of the specified grease to each sliding parts of the ratchet plate and ratchet pawl.
Specified grease : Multipurpose grease SAE J310, NLGI No.2
5. After installing the cable adjuster, adjust the parking brake lever stroke.
