Sonata GLS V6-2.7L (2002)
WARNING
Do not interrupt the reprogramming at any time. The ECM will be rendered inoperative if the reprogram does not download completely.
8.
The Hi-Scan Pro reinitializes the ECM.
9.
When the REPROGRAMMING COMPLETED message is displayed, check the new ECM ID displayed on the Hi-Scan Pro screen to verify that
the correct ECM software has been downloaded.
Refer to the ECM SPECIFICATION TABLE shown in this TSB for the ECM ID listing. Turn the Hi-Scan Pro OFF and the process is complete.
10.
When the reprogramming is completed successfully, turn the ignition to the OFF position, wait 15 seconds, then start the engine to check for
proper operation.
11.
Check for DTC using the Hi-Scan Pro with system software card and erase any DTC.
Explanation of Error Message
