hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - 2nd to 3rd Gear Shift Flare|Page 5863 > < Campaign - PROM Update for O2 Sensor DTC's|Page 5858
Page 1
background image

Technical Service Bulletin # 02-40-003

Date: 020101

A/T - 2nd to 3rd Gear Shift Flare

Group: TRANSAXLE

Number: 02-40-003

Date: JANUARY, 2002

Model: 2002 SONATA

Subject:
2002 SONATA 2-3 SHIFT FLARE TCM REPROGRAMMING INSTRUCTIONS

DESCRIPTION:
This bulletin provides a procedure to reprogram the TCM (Transaxle Control Module) software by using the Hi-Scan Pro.

The 2002 Sonata updated software addresses the following shift condition:

^

2-3 shift flare (engine speed increases during shift).

VEHICLES AFFECTED:
^

Model: 2002 SONATA

^

Affected vehicle production date range: Produced through November 30, 2001

^

Affected vehicle identification number (VIN) range:

-

SONATA 2.7L: Produced through KMHWF35H22A594575

-

SONATA 2.4L: Produced through KMHWF25S02A594659

TCM/ECM SPECIFICATION TABLE

CAUTIONS BEFORE REPROGRAMMING:

1.

Conduct reprogramming with the ignition key in the "ON" position.

2.

Be careful not to disconnect any cables connected to the vehicle or Hi-Scan Pro during reprogramming.

WARNING: 

If reprogramming is interrupted, the manual update procedure must be used.

3.

Do not start the engine during reprogramming.

4.

Do not turn the ignition key off during reprogramming.

5.

When the reprogramming is completed, turn off the ignition key for 20 seconds before starting the engine.

A/T - 2nd to 3rd Gear Shift Flare|Page 5863 > < Campaign - PROM Update for O2 Sensor DTC's|Page 5858