hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < A/T - 2nd to 3rd Gear Shift Flare|Page 5868
Page 8
background image

9.

The Hi-Scan Pro checks the TCM ID or ECM/TCM IDs to confirm reprogramming is complete.

NOTE: 

Check the new TCM ID or ECM/TCM IDs displayed on the screen with the TCM/ECM specifications shown in this TSB to verify that the correct
TCM or ECM/TCM program has been downloaded.

10.

When the reprogramming is completed successfully, turn the ignition to the OFF position for 20 seconds and then start the engine for proper
operation.

Explanation of Error Message

1.

"INVALID PASSWORD": Please enter the exact password again.

2.

"REPROGRAMMING ERROR, PLEASE WAIT FOR RETRY": An error occurred during reprogramming, the Hi-Scan Pro will retry
reprogramming automatically.

3.

"ALREADY REPROGRAMMED" or "INCORRECT TARGET ID": The reprogramming has previously been done on this vehicle or the ECM/
TCM is not the type subject to this reprogramming procedure.

4.

"REPROGRAM ERROR, PLEASE CHECK THE SYSTEM": In this case, you must reprogram manually after selecting the menu option "02. EF
AT SHIFT QUALITY [ERROR]".

All Other Service Bulletins for PROM - Programmable Read Only Memory: > < A/T - 2nd to 3rd Gear Shift Flare|Page 5868