Sonata GLS V6-2.7L (2002)
28.
Install the motor back onto the window regulator. Use care not to strip the screws.
29.
Install the window regulator into the door and reinstall all removed components in the reverse order of removal.
NOTE
The door trim seal (P/N's 82391-38110 LH and 82392-38110 RH) must be intact and sealed to prevent future water leaks. If it is torn, it must
be replaced. If it needs additional sealant, use butyl tape, 3M strip caulk or a similar sealant product.
30.
Check the power window glass for proper operation.
31.
Perform the above procedure for the power window regulator upper holder in the other front door.
