hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Front Door Window Regulator|Service and Repair|Page 10991 > < Front Door Window Regulator|Service and Repair|Page 10989
Page 3
background image

9. Lower the door window glass and loosen the carrier plate mounting bolts in the regulator channel.

Tightening torque
Front door glass mounting bolts:
8 - 12 Nm (80 - 120 kg.cm, 5.8 - 8.7 lb.ft)

10. Pull the door glass out through the window slot.

11. Remove the door regulator channel mounting bolts and then remove the door regulator assembly.

Tightening torque
Door regulator channel mounting bolts:
4 - 6 Nm (40 - 60 kg.cm, 2.9 - 4.4 lb.ft)

12. Remove the front door latch and actuator.

13. Remove the outside door handle.

Front Door Window Regulator|Service and Repair|Page 10991 > < Front Door Window Regulator|Service and Repair|Page 10989