Tiburon L4-1.8L (1997)
INSTALLATION
1. Machine the valve guide insert hole in the cylinder head to the specified oversize of the new valve guide.
2. Using the valve guide remover/installer push rod with adaptor tool No. 09222-29000, or equivalent, press fit the valve guide.
NOTE:
-
Using the valve guide remover/installer with adapter makes it possible to press fit the valve guide to a predetermined height.
-
Install the valve guide from the top of the cylinder head.
3. After installing the valve guides, insert new valves and check the clearance.
4. Whenever valve guides are replaced, check for valve-to-seat contact, and recondition the valve seats as necessary.
