Tiburon L4-1.8L (1997)
7. Disconnect liquid tube (B) side fitting of the liquid tube (C).
8. Remove the mounting nut of the liquid tube (B) at the side of the liquid tube (C).
9. Disconnect the receiver drier side fitting of the liquid tube (B).
10. Remain the liquid tube (B) in removed state.
NOTE: Because of the receiver/drier and its mounting bracket, it is impossible to take out the liquid tube (B) even though it has been removed.
11. Remove the receiver/drier mounting bolt from the receiver/drier mounting bracket.
12. Remove the receiver/drier from its mounting bracket.
13. Remove the mounting bolts of the receiver/drier mounting bracket.
