hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor Wheel <--> [Crankshaft Position Timing Ring]|Specifications|Page 3575 > < Crankshaft Position Sensor Wheel <--> [Crankshaft Position Timing Ring]|Specifications|Page 3573

Tiburon L4-1.8L (1997)

Page 1
background image

Crankshaft Position Sensor Wheel: Testing and Inspection

1. Remove the crankshaft sensor wheel.
2. Check the crankshaft sensor wheel for damage, cracks and wear. Replace if necessary.
3. Check the clearance between crankshaft sensor wheel and crank position sensor with depth gage.

Standard Value:

Clearance between crankshaft sensor wheel and crank position sensor: 

0.5-1.5 mm (0.020-0.059 inch) 

NOTE:
-

Measure the depth of the top of sensor wheel tooth and the outside of transaxle housing.

-

Measure the difference between sensor length and depth.

-

Sensor length is the distance between the end of sensor and inner point of contacting face.

Crankshaft Position Sensor Wheel <--> [Crankshaft Position Timing Ring]|Specifications|Page 3575 > < Crankshaft Position Sensor Wheel <--> [Crankshaft Position Timing Ring]|Specifications|Page 3573