hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - Harsh 4-3 Downshift When Decelerating|Page 3407 > < A/T - Harsh 4-3 Downshift When Decelerating|Page 3405
Page 3
background image

1.

If the following three conditions are met:

^

The Throttle Position Sensor (TPS) is suspected 

^

The ECM / TCM has no codes stored

^

The Throttle Position Sensor (TPS) has the words "DAE SUNG" molded on the part

Then conduct the following diagnostic procedure:

^

The vehicle must be idling (with all accessories turned off)

^

Push on the side of the TPS connector, towards the dash panel. The force used should be firm enough to slightly deflect the TPS housing, but
not enough to damage or break anything.

^

If the TPS is not operating properly, the engine will surge in response to your push.

^

If the Hi-Scan Pro or HDS is used to record the TPS output, the above procedure will show that the TPS output increases toward 5V when the
connector is pushed.

2.

If the ECM has a TPS related code stored (with or without the MIL on), replace the TPS.

PARTS INFORMATION

WARRANTY INFORMATION:

Normal warranty operation codes and times apply.

Technical Service Bulletin # 00-36-006

Date: 000301

TPS - Driveability Concerns

Number
00-36-006

Group 
ENGINE ELECTRICAL

Date
MARCH, 2000

Subject

A/T - Harsh 4-3 Downshift When Decelerating|Page 3407 > < A/T - Harsh 4-3 Downshift When Decelerating|Page 3405