hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Component Tests|Page 1170 > < Component Tests|Page 1168
Page 3
background image

2. If the idle condition or accelerating is abnormal, check the TPS connector. (When the TPS connector is not connected properly, the current data

can show that the idle state remains off, though the accelerator pedal is released. And it results in improper idle or accelerating.)

3. Input voltage from throttle position sensor is below 0.1 V or above 4.7 V when ignition switch is turned on.

USING VOLTMETER

Component Tests|Page 1170 > < Component Tests|Page 1168