Tiburon L4-1.8L (1997)
11. Install the vane plates with the round end facing outward.
12. Install the gasket and the rear cover.
13. Tighten the suction connector.
Disassembly
NOTE: Clean all disassembled parts with a suitable cleaning solvent.
1. Remove the power steering oil pump mounting bracket.
2. Remove the suction pipe and the O-ring from the oil pump.
3. Remove the rear cover with the gasket and pins.
4. Remove the cam ring.
5. Remove the rotor and vanes.
6. Remove the front side plate.
