Tiburon L4-1.8L (1997)
Power Steering Pump: Testing and Inspection
PRESSURE TEST
1. Disconnect the pressure hose from the oil pump. Connect the Special Service Tool (SST) between the oil pump and pressure hose as illustrated.
2. Bleed the air, and then start the engine and turn the steering wheel several times so that the fluid temperature rises to approximately 50°C (122°F).
3. Increase the engine speed to 1,000 rpm.
4. Close the shut-off valve of the special tool and measure the Oil Pump fluid pressure to confirm that it is within the standard value range.The relief
pressure should measure 6.1-6.6 MPa (882-953 psi).
CAUTION: Do not keep the shut-off valve on the pressure gauge closed for more than ten seconds.
5. Remove the special tools, and tighten the pressure hose to 55-65 Nm (40.6-47.9 ft. lbs.).
