Tiburon L4-1.8L (1997)
14. Apply the specified oil, ATF DEXRON II and grease, multipurpose Grease SAE J310, NLGI No.2 to the pinion valve assembly and install in the
gear housing assembly.
15. Apply the specified oil and then use the special tool to install the seal in the valve body housing.
16. Install the valve body assembly with the seal ring to the gear box.
17. Install the tab washer and the tie rod and stake the tab washer end at two points over the tie rod.
NOTE:
-
Align the tab washer pawls with the rack grooves.
-
Always use a new tab washer.
18. With the pinion turned all the way clockwise, tighten the self locking nut.