Tiburon L4-1.8L (1997)
Steering Gear: Adjustments
1. Rotate the pinion gear for approximately 4 to 6 seconds for one rotation to confirm the total pinion preload standard value is 0.6-1.3 Nm (5.2-11.3
ft. lbs.).
NOTE: Measure the pinion preload through the entire stroke of the rack.
2. If the measured value is out of specifications, first adjust the yoke plug, then re-check the total pinion preload.
3. If the yoke plug adjustment does not obtain the total pinion preload, check or replace the yoke plug components.
