Tiburon L4-1.8L (1997)
Band Apply Servo: Service and Repair
DISASSEMBLY
For disassembly, refer to illustration.
ASSEMBLY
1. Install the rod and nut to the kickdown servo piston.
2. Install two new D-rings (one large and one small) around the circumference of the piston, and then apply a coating of Automatic Transmission
Fluid (ATF) to the D-rings.
3. Install the kickdown servo piston in the sleeve.
4. Install a new O-ring around the circumference of the sleeve, and apply a coating of ATF to the O-ring.
