hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

A/T - Seal & Case Identification|Page 6946 > < A/T - Seal & Case Identification|Page 6944
Page 7
background image

DESCRIPTION:

Some 1996-99 Elantra and 1997-99 Tiburon transaxles produced prior to 05/15/99 may experience an oil leak in the bellhousing behind the torque
converter. If this occurs, the oil leak will be observed at the drain hole on the lower surface of the transaxle.

An oil leak at this location on a vehicle with less than 15,000 miles in service may be due to case porosity.

SERVICE INFORMATION:

If you are servicing a vehicle with an oil leak in the bellhousing behind the torque converter, refer to the table shown to determine the proper repair
procedure.

REPAIR INFORMATION:

1.

Remove the transaxle.

2.

Remove the torque converter.

3.

Use a wrench or suitable tool to remove the oil seal.

A/T - Seal & Case Identification|Page 6946 > < A/T - Seal & Case Identification|Page 6944