Tiburon L4-1.8L (1997)
Adjust the delta sash by using the delta sash adjusting bolt at the bottom of the sash. (Distance between the delta sash and the door inner panel: 17
mm, 0.669 in.)
Delta sash mounting bolt tightening torque:
6.5 - 10.1 lb.ft.
Delta sash adjusting bolt tightening torque:
6.5 - 10.1 lb.ft.
2.
Front Channel Inward/Outward Adjustment:
The front channel adjustment will adjust the angle the window sits when the door is open, and how tightly it presses against the door opening along
the "A" pillar. If it is too tight, the window will not roll up properly. If it is too loose, the window will be gapped to the "A" pillar, creating a wind
noise.
Adjust the channel by using the channel adjusting bolt at the bottom of the channel. (Distance between the channel and the door inner panel: 18.5
mm, 0.728 in.)
Channel mounting bolt tightening torque:
6.5 - 10.1 lb.ft
Channel adjusting bolt tightening torque:
6.5 - 10.1 lb.ft
3.
Regulator Inward/Outward Adjustment:
This adjustment is similar to the adjustment procedure # 2, but effects the fit of the glass to the roof moulding.
