Tiburon L4-1.8L (1997)
8.
Insert the new rubber blade into the frame from the upper end of the rubber blade, following the insert direction.
9.
Twist the grooved end of the rubber blade to fit the groove into the frame.
10.
Slide the spring rails into the slots on both side of the rubber blade, making sure to seat them fully on both ends.
11.
Reinstall the wiper blade assembly to the wiper arm. Check that the rubber blade is secure in the frame and the wiper assembly cleans the glass
effectively.
PARTS INFORMATION:
WARRANTY INFORMATION:
Please note that windshield wiper rubber blades are covered under warranty for 12 months or 12,000 miles.
